Ajanta Export Industry

Backed with huge industry experience and market understanding, we are involved in providing a wide variety of Multi Function Electric ICU Bed for our valued patrons.

Features:

• Split side rails: The 4pcs PP side rails provide the patient with protection against falls.
• Removable mattress platform: The mattress platform is easy removable and easy for sterilization.
• Central nurse control system: The nurse or supervisor can adjust all the positions and find the comfortable and proper positions for the patients
• Control in the side rails: Controls in the side rails increase the patient’s independence so that the patients can operate it according to the self-requirement
• Bed extension: The integrated bed extension adjusts the mattress platform length to the individual’s height
• Linen shelf: The linen shelf at the bottom of foot end also stores the supervisor panel
• H/F boards locks: The board locks prevent accidental removal of the bed boards when steering or handing the bed
• X-ray cassette holder: The holder’s special sliding construction allows the cassette to be comfortably inserted beneath the mattress platform, the plate from is made of phenolic resign, 95% translucent. Material .
• 9.Manual/Electric CPR: The CPR is easy and convenience to operate that is one key control. And the manual CPR is equipped with damping device, which can let the back rest fall down slowly to ensure the safety of the patient when the power is off, the whole process can be single hand operation.
• Angle gauge: The angle gauges of side rails in the head and foot direction show the angles of the backrest and tilt of the whole bed mattress platform respectively
• Protective corner bumpers
• Lifting pole and infusion stand holes
• Mattress holders
• Four 125mm diameter castors with central locking system
• Mattresses is made of high resilience sponge with waterproof cover

Additional Information:

• Delivery Time: 5

We are counted as a well-known manufacturer and supplier of quality ICU Bed Mechanical. With the facility of manual adjustment, this bed is highly appreciated by our prestigious clients. The offered bed is designed and manufactured with utmost care by using the excellent quality raw material and innovative techniques.

Specifications:

• Frame work made of rectangular M.S. tube4 section top made of perforated M.S. sheet
• Backrest, knee rest, TB/RTB and hi-lo position maneuvered by separate screw from foot end
• S.S panel
• Head & foot bows
• Up and down safety side railing
• Telescopic IV rod with four locations

Additional Information:

• Delivery Time: 5

Linen Change Trolley
* MS Tubular Frame mounted on 10cms Dia castors
* Three shelves made of MS Sheet
* A Canvas Bag fitted on Front side
* Epoxy Powder Coated Finish

Additional Information:

• Delivery Time: 5

Strong MS powder coated structure. 150mm castors, 2 with brakes. Removable stretcher. size :203Lx560Wx820H mm.

Additional Information:

• Delivery Time: 5

Folding strecher 4 fold with front wheels.
Strecher Made of aluminium Pipe.
Size : 80" X 22"

Additional Information:

• Delivery Time: 5

Product Description

·         Mild steel tubular frame work.

·         Height adjustable  with foot  operated hydraulic pump.

·         Three section top with  high density  PU form mattress.

·         Mounted on  12cm castor, 2 with brakes.

·         Provision of  IV rod and basin under top.

·         Side railing on head side.

·         Pre treated  and epoxy powder coating.

Additional Information:

• Delivery Time: 5

Overall Size : 210L x 56W x 81H cms
• Frame work of Mild Steel
• Swing away type Safety Side Railing
• Two section foam padded top
• Backrest adjustable
• Removable Stretcher Top
• Trolley mounted on 15cms dia Castors-two with brakes
• Finish : Epoxy Powder Coated

Additional Information:

• Delivery Time: 5

• Frame Work is made of Rectangular/Square M.S.Tube.
• It has Back Rest Section.
• Adjustable on Ratchet/Lever.
• Legs Fitted with Pvc Stumps.
• Adjustable Lithotomy Poles with Straps.
• Load bearing capacity is 140 kg.
• Epoxy Powder Coated.

Additional Information:

• Delivery Time: 5

  Tubular Frame work mounted on 125 mm dia castor with brakes

·         Three Section top made of MS pipe with fixed Cushioned Mattress

·         Trendlenburg / Reverse Trendlenburg Positions, Height Adjustment, Back section adjustment through electric actuator system

·         Leg end section can slide under the main section

·         Provided with a pair of upholstery lithonomy position.

·         Dimension: 188 x 90 x 80 cm

Additional Information:

• Delivery Time: 5

We are one of the leading manufacturers, suppliers & exporters of Blood Donor Couch. 

Features:- 

·         Blood sampling chair with fixed height

·         Comfortable upholstery with good density

·         Stainless Steel quality, epoxy paint 

·         Adjusting backrest via self-locking mechanism system 

·         Adjusting leg rest via a self-locking mechanism system

·         Equipped with 2 blood test splints, every position adjustable by serrated blocks system

Additional Information:

• Delivery Time: 5

Phoenix Dental & Medical Private limited , we are a leading manufacturer of medical & hospital Furniture, Clothing. Our major customers consist of Government Hospitals, Private Hospitals, and Domestic and Overseas Market. We have a state-of-the-art factory covering fairly large area, Automatic Machines, Large Manufacturing Capacity, Quality Products, R&D, domain knowledge and over 50 employees. We maintain strict quality parameters at all levels of our operations and manufacturing process such as recruitment and retaining technically competent persons, procurement of quality raw-materials and components, Technically Advanced Machineries, R & D, prompt after sales services , Timely Delivery and execution of orders. We strictly follow Fair Business Practices, believes in transparency and ethics. We are committed to providing our customers Economical, Cost Effective, High Quality Products and services in the shortest possible time schedule. We are committed to preserving our natural resources, we strictly monitor our processes to minimise the impact on our environment.

Additional Information:

• Delivery Time: 1

• Approx Dimension : 72”L x 30”W x 30”H.
• Tubular frame work made in two sections.
• Body sections with legs mounted on PVC stumps.
• Leg section on swivel castors with brakes.
• Two sections cushioned top.
• Height adjustable a pair of knee crutches.
• Pre treated & Epoxy powder coated.

Additional Information:

• Delivery Time: 5

This is a latest design head end control operation Table suitable to perform all operation position such as abdominal, thyroid, gall bladder, kidney, neurosurgery, plastic surgery etc by obtaining flex, reflex, lateral tilt, trendlenburg, reverse trendlenburg and chair positions by the Anestheist who can control these ppositions by sitting at the head end side of the table. Sturdy and heavy duty base covered with S.S. Sheet for durablity of table. Single action double cylinder hydraulic pump which can be raised to minimum & maximum height as mentioned in specification. It can be obtain by foot pandle. Five sections S.S.Top, with detachable legend section All the positions can be maneuvred from head end side by moving the handle as mentioned on the indicator Dial.

STANDARD ACCESSORIES : Anaesthetic Frame padded Side Supports intravenous Arm M/board Padded Shoulder Supports wristlets a pair of knee crutches tootrest with ss top
lateral Side Supports kidney Bridge water Proof Rubber Mattress

OPTIONAL ACCESSORIES : S.S Trya with bracket for instruments Permeable Tops For X-Ray.
Cassettes neuro Surgery accessories ortho Attachment.

TECHNICAL DATA : Length of the table top : 180 to 195cms
width of the table top : 50cms
Minimum height : 75+5cms
Maximum height : 95+5cms

Hydraulic lift : 20cms
Lateral Tilt Both Sides : 20^{o +}2^o
Flex : 90^o
Reflex : 220^o
Longitudinal Til 45^o + 3^o

Additional Information:

• Delivery Time: 5

• Blood sampling chair with fixed height approx. 670 mm
• Comfortable upholstery with good density approx. width 550
• Mild Steel epoxy powder coated finish
• Adjusting back rest via 1 gas jack
• Adjusting leg rest via a self locking mechanism system
• Equipped with 2 blood test splints, every position adjustable by serrated blocks system
• Load capacity: 130kg

Additional Information:

• Delivery Time: 5

We are one of the leading manufacturers, suppliers & exporters of Blood Donor Couch. 

Features:- 

·         Blood sampling chair with fixed height

·         Comfortable upholstery with good density

·         Stainless Steel quality, epoxy paint 

·         Adjusting backrest via self-locking mechanism system 

·         Adjusting leg rest via a self-locking mechanism system

·         Equipped with 2 blood test splints, every position adjustable by serrated blocks system

Additional Information:

• Delivery Time: 5

We are engaged in supplying a wide range of Ambulance Stretcher.

Specifications:

• Ambulance stretcher Lightweight, strong structure, lovely design, good arts and crafts, easy antisepsis, small size, convenient to use
• Utilizes high precision mechanical transmission
• Can be used automatically folded through the left and right hand control handle
• Made of high quality aluminium tube
• Dimensions: A-High position:1900x560x900mm,B-low position:1900x560x280mm
• Diameter of the castors:125mm
• Applicable for various kind of hospitals, emergency centers, ambulance and battle fields.
• Load weight:120Kg
• Product weight:40Kg

Additional Information:

• Delivery Time: 5

Overall approx. size: 800mm L x 600mm W x I 408mm H.
• Suitable for keeping monitor; light source, camera unit, VCR, printer, stabilizer etc.
• All Five S.S. shelves
• Other four shelves with SS rails which can be adjusted at desire height in between top shelf and drawer
• SS drawer at bottom

Additional Information:

• Delivery Time: 5

 Approx Tray s.s size 91LX50W cms
* Frame work of CRC tubes mounted on 10cms castors
* Height adjustable by gear handle
* Epoxy Powder Coated
* Also available in s.s frame & tray

Additional Information:

• Delivery Time: 5

Height adjustment by foot operated hydraulic pump.
Two sectional X-ray translucent top with mattress & tray for holding X-ray cassettes.
Pneumatic mechanism for trendelenburg / reverse trendelenburg positions.
Head raise by ratchet system.

Additional Information:

• Delivery Time: 5

SS Five sectional top with large cut for perineal drainage tray, built kidney bridge. Both side controls. Hydraulic operation tables. Heavy duty mild steel base with nylon wheels for easy mobility or stability with single action foot actuated floor locking. Smooth gear mechanism to avail all operating positions. 50,thick electrically sealed mattress. Provided with all sporting accessories. Durable heavy duty leak proof hydraulic pump with double cylinder concealed in central chamber. Provided with all standard accessories.

Additional Information:

• Delivery Time: 5

Product DescriptionBacked by our expert and experienced professionals, we provide Hospital Operation Table.

Additional Information:

• Delivery Time: 5

Our firm specializes in providing our prestigious clients with a quality array of Obstetric Labour Table that is designed for the comfort of the women having labor pain. Our offered range is tested on various parameters under the guidance of our experienced professionals. Keeping in mind the diverse requirements of our clients, we provide this table in different sizes and designs. In addition to this, clients can avail this table from us in various specifications and at affordable prices.

Features:

• Fine finish
• Sturdy design
• Great strength

Additional Information:

• Delivery Time: 5

Product Description

• SS top in three section.
• Trendlenburg position adjustable by screw mechanism.
• High low function operated by hydraulic pump.
• Backrest section adjustable on ratchet system.
• Leg end section can slide under main section.
• Comes with IV Rod, lithotomy rods and both side railings.

Additional Information:

• Delivery Time: 5

Additional Information:

• Delivery Time: 5

Preprex Transparent Crib with mattress
* Trendleburg /Rev Trendleburg
* Laminated upboard with plate form
* 5cms Castors I.V Rod
* Pretreated & Epoxy Power coated

Additional Information:

• Delivery Time: 5

Blood Donor Chair is manufactured under the vigilance of our diligent professionals as per quality norms using premium quality stainless steel and contemporary techniques. Based on haemodynamic principles having heavy duty geared Motor attached with Blood Collection Monitor Stand. Tilt adjustment can be done by remote control. The provided folding Blood Donor Couch is extensively used in hospitals, medical colleges and blood banks to collect blood from donor.

Features:

• Facility for blood collection from both sides.
• Provides a comfortable position for the donor.
• Variable positioning for either arm with a Comfortably wide arm-rests
• Tilt adjustment can be done by using remote control.
• Comfortable chair type with soft padding for cushioning and rexin cover.
• Ensuring safety and comfort to the donor
• 4 Heavy Duty Lockable castors for easy mobility.
• Based on hemodyamic principle.

Additional Information:

• Delivery Time: 5

Product DescriptionIn order to retain our goodwill in this industry, we are providing a qualitative array of Operation Theater Light.

Additional Information:

• Delivery Time: 5