Ajanta Export Industry

    Inner chamber, outer chamber & support ring are fully made of stainless steel.

·         Heaters cover stand & carrier/bucket are made of stainless steel.

·         Lid made of thick machined stainless steel plate.

·         Radial locking lid ensures user safety & safe locking.

·         Lid is fitted with pressure gauge, spring loaded safety valve, double safety valve, manual exhaust valve, vacuum breaker as a safety device & water level indicator.

·         Drain valve facilitates easy cleaning of the chamber.

·         Moulded joint less silicon rubber gasket.

·         All internal joints are argon arc welded, ground & polished to give crevice free internals.

·         Miniature circuit breaker for mains on/off plus safety of control panel.

·         Industrial grade energy efficient heaters reduce power bills drastically.

 

 

Sterilizing Pressure=1.2kgf/cm2 (15 psi) at 121oC

Operating Pressure= from 15 psi to 22 psi (adjustable)

Power Supply=220x230V AC, 50/60 Hz

Pressure Vessel= SS 304 Grade Stainless Steel

External Wall=SS 304 Grade Stainless Steel

Top Lid=SS 304 Grade Stainless Steel

Basket= SS 304 Grade Stainless Steel

INCLUDING

1.                 Water Level Indicator

2.                 Stainless Steel Basket

3.                 Vacuum Breaker

OPTIONAL

A.            Automatic pressure control switch.

B.            Automatic low water cut off system.

C.            Microprocessor based digital temperature indicator cum controller with set value and process vale/digital timer.

 

D.            Microprocessor based digital temperature indicator cum controller with set value and process value/ timer and purging on/off fully automatic.

Additional Information:

• Delivery Time: 5

 Inner chamber, outer chamber and support ring are fully made of stainless steel.

·         Heaters cover stand and carrier/bucket are made of stainless steel.

·         Lid made of thick machined stainless steel plate.

·         Radial locking lid ensures user safety and safe locking.

·         Lid is fitted with pressure gauge, spring loaded safety valve, double safety valve, manual exhaust valve, vacuum breaker as a safety device and water level indicator.

·         Drain valve facilitates easy cleaning of the chamber.

·         Moulded joint less silicon rubber gasket.

·         All internal joints are argon arc welded, ground and polished to give crevice free internals.

·         Miniature circuit breaker for mains on/off plus safety of control panel.

·         Industrial grade energy efficient heaters reduce power bill drastically.

TECHNICAL SPECIFICATION

Sterilizing pressure=1.2kgf/cm2 (15 psi) at 121oC

Operating pressure= from 15 psi to 22 psi (adjustable)

Power supply=220x230 AC, 50/60 Hz Pressure Vessel= SS 304 Grade Stainless Steel

External Wall=SS 304 Grade Stainless Steel

Top Lid=SS 304 Grade Stainless Steel

Basket= SS 304 Grade Stainless Steel

 

INCLUDING

1.            Water Level Indicator.

2.            Stainless Steel Basket.

3.            Vacuum Breaker.

4.            Automatic pressure control switch.

5.            Automatic low water cut off switch.

6.            Fully automatic PID purging system.

Additional Information:

• Delivery Time: 5

  Inner chamber, outer chamber and support ring are fully made of stainless steel.

·         Heaters cover stand and carrier/bucket are made of stainless steel.

·         Lid made of thick machined stainless steel plate.

·         Brass knobs ensures user safety and safe locking.

·         Lid is fitted with pressure gauge, spring loaded safety valve, double safety valve, manual exhaust valve, vacuum breaker as a safety device and water level indicator.

·         Drain valve facilitates easy cleaning of the chamber.

·         All internal joints are argon arc welded, ground and polished to give crevice free internals.

·         Miniature circuit breaker for mains on/off plus safety of control panel.

·         Industrial grade energy efficient heaters reduce power bill drastically.

TECHNICAL SPECIFICATION

Sterilizing pressure=1.2kgf/cm2 (15 psi) at 121oC

Operating pressure= from 15 psi to 22 psi (adjustable)

Power supply=220x230 AC, 50/60 Hz

Pressure Vessel= SS 304 Grade Stainless Steel

External Wall=SS 304 Grade Stainless Steel

Top Lid=SS 304 Grade Stainless Steel

Basket= SS 304 Grade Stainless Steel

INCLUDING

1.                 Water Level Indicator

2.                 Stainless Steel Basket

3.                 Vacuum Breaker

OPTIONAL

A.            Automatic pressure control switch.

B.            Automatic low water cut off system.

C.            Microprocessor based digital temperature indicator cum controller with set value and process vale/digital timer.

D.            Microprocessor based digital temperature indicator cum controller with set value and process value/ timer and

                purging on/off fully automatic.

Additional Information:

• Delivery Time: 5

   Inner chamber, outer chamber and support ring are fully made of stainless steel.

·         Heaters cover stand and carrier/bucket are made of stainless steel.

·         Lid made of thick machined stainless steel plate.

·         Brass  knobs ensures user safety and safe locking.

·         Lid is fitted with pressure gauge, spring loaded safety valve, double safety valve, manual exhaust valve, vacuum breaker as a safety device and water level indicator.

·         Drain valve facilitates easy cleaning of the chamber.

·         Moulded joint less silicon rubber gasket.

·         All internal joints are argon arc welded, ground and polished to give crevice free internals.

·         Miniature circuit breaker for mains on/off plus safety of control panel.

·         Industrial grade energy efficient heaters reduce power bill drastically.

TECHNICAL SPECIFICATION

Sterilizing pressure=1.2kgf/cm2 (15 psi) at 121oC

Operating pressure= from 15 psi to 22 psi (adjustable)

Power supply=220x230 AC, 50/60 Hz

Pressure Vessel= SS 304 Grade Stainless Steel

External Wall=SS 304 Grade Stainless Steel

Top Lid=SS 304 Grade Stainless Steel

Basket= SS 304 Grade Stainless Steel

 

 

INCLUDING

1.                 Water Level Indicator

2.                 Stainless Steel Basket

3.                 Vacuum Breaker

OPTIONAL

A.            Automatic pressure control switch.

B.            Automatic low water cut off system.

C.            Microprocessor based digital temperature indicator cum controller with set value and process vale/digital timer.

D.            Microprocessor based digital temperature indicator cum controller with set value and process value/ timer and purging on/off fully automatic.

Additional Information:

• Delivery Time: 5

      Inner chamber, outer chamber and support ring are fully made of stainless steel.

·         Heaters cover stand and carrier/bucket are made of stainless steel.

·         Lid made of thick machined stainless steel plate.

·         Radial locking lid ensures user safety and safe locking.

·         Lid is fitted with pressure gauge, spring loaded safety valve, double safety valve, manual exhaust valve, vacuum breaker as a safety device and water level indicator.

·         Drain valve facilitates easy cleaning of the chamber.

·         Moulded joint less silicon rubber gasket.

·         All internal joints are argon arc welded, ground and polished to give crevice free internals.

·         Miniature circuit breaker for mains on/off plus safety of control panel.

·         Industrial grade energy efficient heaters reduce power bill drastically.

TECHNICAL SPECIFICATION

Sterilizing pressure=1.2kgf/cm2 (15 psi) at 121oC

Operating pressure= from 15 psi to 22 psi (adjustable)

Power supply=220x230V AC, 50/60 Hz

Pressure Vessel= SS 304 Grade Stainless Steel

External Wall=SS 304 Grade Stainless Steel

Top Lid=SS 304 Grade Stainless Steel

Basket= SS 304 Grade Stainless Steel

INCLUDING

1.                 Water Level Indicator

2.                 Stainless Steel Basket

3.                 Vacuum Breaker

OPTIONAL

A.            Automatic pressure control switch.

B.            Automatic low water cut off system.

C.            Microprocessor based digital temperature indicator cum controller with set value and process vale/digital timer.

 

D.            Microprocessor based digital temperature indicator cum controller with set value and process value/ timer and purging on/off fully automatic.

Additional Information:

• Delivery Time: 5

Inner chamber, outer chamber & support ring are fully made of stainless steel.

Heaters cover stand & carrier/bucket are made of stainless steel.

Lid made of thick machined stainless steel plate.

Radial locking lid ensures user safety & safe locking.

Lid is fitted with pressure gauge, spring loaded safety valve, double safety valve, manual exhaust valve, vacuum breaker as a safety device & water level indicator.

Drain valve facilitates easy cleaning of the chamber.

Moulded joint less silicon rubber gasket.

All internal joints are argon arc welded, ground & polished to give crevice free internals.

Miniature circuit breaker for mains on/off plus safety of control panel.

Industrial grade energy efficient heaters reduce power bills drastically.

 TECHNICAL SPECIFICATION

Sterilizing Pressure=1.2kgf/cm2 (15 psi) at 121oC

Operating Pressure= from 15 psi to 22 psi (adjustable)

Power Supply=220x230V AC, 50/60 Hz

Pressure Vessel= SS 304 Grade Stainless Steel

External Wall=SS 304 Grade Stainless Steel

Top Lid=SS 304 Grade Stainless Steel

Basket= SS 304 Grade Stainless Steel

INCLUDING

1.                 Water Level Indicator

2.                 Stainless Steel Basket

3.                 Vacuum Breaker

OPTIONAL

A.            Automatic pressure control switch.

B.            Automatic low water cut off system.

C.            Microprocessor based digital temperature indicator cum controller with set value and process vale/digital timer.

D.            Microprocessor based digital temperature indicator cum controller with set value and process value/ timer and purging on/off fully automatic.

 All body made of Stainless Steel or Aluminum.

·         Fitted  with pressure gauge.

·         The unit has spring loaded safety valve of pressure adjustment and a dead weight safety valve.

·         It is hydraulically tested up to 30 PSI & is supplied with Electric fitting, Cord & Plug, supplied complete with Tripod stand.

·         To work on 220/330Volt AC Supply

Stainless Steel                   Aluminum Body                                Capacity

300 x 300                              300 x 300                              20 Litres

300 x 375                              300 x 375                              25 Litres

300 x 450                                                                              30 Litres

300 x 500                                                                              40 Litres

Additional Information:

• Delivery Time: 5

The inner/outer chamber, steam jacket and boiler are made of heavy gauge SS with leak proof argon arc welding.

·         The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses.

·         Hydraulically tested to withstand 2.5 times the working pressure.

·         Steam boiler is fitted with water level indicator, pressure gauge, low water cut off device and automatic pressure control devices. Fitted with safety valve as a safety device.

·         Drain valve is fitted at the side bottom for easy draining/clearing.

·         This affords a complete safety to the working personnel against explosive opening.

·         Two separate valves are provided for evacuating steam from inner chamber and jacket as and when desired.

·         Sterilization cycle is controlled by single point multiport valve.

·         The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized.

·         An automatic vacuum breaker is fitted to all units as a standard accessory in order to break vacuum in case of steam condensation.

·         The flanged immersion type heating element made from a very high grade material provide fast formation of pressure in the system and are protected through a electric low water level cut off device.

·         All sterilizers are provided with triple safety features through a “Piezostate” (automatic pressure control system) and a spring loaded safety valve fitted to the boiler/steam generator.

·         The chamber is fitted with spring loaded safety valve and a dead weight release valve.

·         To work on 220/230 or 440 volts, 3 phase, 50 Hz AC supply.

Additional Information:

• Delivery Time: 5

    The inner/outer chamber, steam jacket and boiler are made of heavy gauge SS with leak proof argon arc welding.

·         The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses.

·         Hydraulically tested to withstand 2.5 times the working pressure.

·         Steam boiler is fitted with water level indicator, pressure gauge, low water cut off device and automatic pressure control devices. Fitted with safety valve as a safety device.

·         Drain valve is fitted at the side bottom for easy draining/clearing.

·         This affords a complete safety to the working personnel against explosive opening.

·         Two separate valves are provided for evacuating steam from inner chamber and jacket as and when desired.

·         Sterilization cycle is controlled by single point multiport valve.

·         The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized.

·         An automatic vacuum breaker is fitted to all units as a standard accessory in order to break vacuum in case of steam condensation.

·         The flanged immersion type heating element made from a very high grade material provide fast formation of pressure in the system and are protected through a electric low water level cut off device.

·         All sterilizers are provided with triple safety features through a “Piezostate” (automatic pressure control system) and a spring loaded safety valve fitted to the boiler/steam generator.

·         The chamber is fitted with spring loaded safety valve and a dead weight release valve.

·         To work on 220/230 or 440 volts, 3 phase, 50 Hz AC supply.

 

 

TECHNICAL SPECIFICATION

Gasket: made of joint less silicon rubber.

Exhaust pressure: manual through the exhaust valve

Sterilizing pressure: 1.2 to 1.5 kgf/cm2 (15 to 20 psi) at 121oC

Operating pressure: from 15 psi to 20 psi

Pressure gauge: 0.2.1 kgf/cm2 (30 psi)

Tubular stand and supporting ring: made of mild steel or stainless steel

Pressure Vessel= SS 304 Grade Stainless Steel

External Wall=SS 304 Grade Stainless Steel

Top Lid=SS 304 Grade Stainless Steel

Basket= SS 304 Grade Stainless Steel

 

 

Additional Information:

• Production Capacity: 100
• Delivery Time: 5

Additional Information:

• Delivery Time: 5

 The inner/outer chamber, steam jacket and boiler are made of heavy gauge SS with leak proof argon arc welding.

·         The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses.

·         Hydraulically tested to withstand 2.5 times the working pressure.

·         Steam boiler is fitted with water level indicator, pressure gauge, low water cut off device and automatic pressure control devices. Fitted with safety valve as a safety device.

·         Drain valve is fitted at the side bottom for easy draining/clearing.

·         This affords a complete safety to the working personnel against explosive opening.

·         Two separate valves are provided for evacuating steam from inner chamber and jacket as and when desired.

·         Sterilization cycle is controlled by single point multiport valve.

·         The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized.

·         An automatic vacuum breaker is fitted to all units as a standard accessory in order to break vacuum in case of steam condensation.

·         The flanged immersion type heating element made from a very high grade material provide fast formation of pressure in the system and are protected through a electric low water level cut off device.

·         All sterilizers are provided with triple safety features through a “Piezostate” (automatic pressure control system) and a spring loaded safety valve fitted to the boiler/steam generator.

·         The chamber is fitted with spring loaded safety valve and a dead weight release valve.

·         To work on 220/230 or 440 volts, 3 phase, 50 Hz AC supply.

TECHNICAL SPECIFICATION

Gasket: made of joint less silicon rubber.

Exhaust pressure: manual through the exhaust valve

Sterilizing pressure: 1.2 to 1.5 kgf/cm2 (15 to 20 psi) at 121oC

Operating pressure: from 15 psi to 20 psi

Pressure gauge: 0.2.1 kgf/cm2 (30 psi)

Tubular stand and supporting ring: made of mild steel or stainless steel

Pressure Vessel= SS 304 Grade Stainless Steel

External Wall=SS 304 Grade Stainless Steel

Top Lid=SS 304 Grade Stainless Steel

Basket= SS 304 Grade Stainless Steel

 

INCLUDING

1.     Automatic pressure cut off switch

2.     Digital temperature indicator cum controller

3.     Vacuum breaker

4.     Water level indicator

5.    Automatic self locking system

Additional Information:

• Delivery Time: 5

The inner/outer chamber, steam jacket and boiler are made of heavy gauge SS with leak proof argon arc welding.

The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses.

Hydraulically tested to withstand 2.5 times the working pressure.

Steam boiler is fitted with water level indicator, pressure gauge, low water cut off device and automatic pressure control devices. Fitted with safety valve as a safety device.

Drain valve is fitted at the side bottom for easy draining/clearing.

This affords a complete safety to the working personnel against explosive opening.

Two separate valves are provided for evacuating steam from inner chamber and jacket as and when desired.

Sterilization cycle is controlled by single point multiport valve.

The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized.

An automatic vacuum breaker is fitted to all units as a standard accessory in order to break vacuum in case of steam condensation.

The flanged immersion type heating element made from a very high grade material provide fast formation of pressure in the system and are protected through a electric low water level cut off device.

All sterilizers are provided with triple safety features through a “Piezostate” (automatic pressure control system) and a spring loaded safety valve fitted to the boiler/steam generator.

The chamber is fitted with spring loaded safety valve and a dead weight release valve.

To work on 220/230 or 440 volts, 3 phase, 50 Hz AC supply.

TECHNICAL SPECIFICATION

Gasket: made of joint less silicon rubber.

Exhaust pressure: manual through the exhaust valve

Sterilizing pressure: 1.2 to 1.5 kgf/cm2 (15 to 20 psi) at 121oC

Operating pressure: from 15 psi to 20 psi

Pressure gauge: 0.2.1 kgf/cm2 (30 psi)

Tubular stand and supporting ring: made of mild steel or stainless steel

Pressure Vessel= SS 304 Grade Stainless Steel

External Wall=SS 304 Grade Stainless Steel

Top Lid=SS 304 Grade Stainless Steel

Basket= SS 304 Grade Stainless Steel

INCLUDING

·         Automatic pressure cut off switch

·         Digital temperature indicator cum controller

·         Vacuum breaker

·         Water level indicator

·         Automatic self locking system

·         Automatic low water cut off switch

·         Moisture trap

·         Fully automatic system with HMI PLC based autoclave with data logger digital pressure indicator cum controller, digital temperature controlled system can be installed on order.

·         Vacuum Pump

Additional Information:

• Delivery Time: 5

 The inner/outer chamber, steam jacket and boiler are made of heavy gauge SS with leak proof argon arc welding.

·         The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses.

·         Hydraulically tested to withstand 2.5 times the working pressure.

·         Steam boiler is fitted with water level indicator, pressure gauge, low water cut off device and automatic pressure control devices. Fitted with safety valve as a safety device.

·         Drain valve is fitted at the side bottom for easy draining/clearing.

·         This affords a complete safety to the working personnel against explosive opening.

·         Two separate valves are provided for evacuating steam from inner chamber and jacket as and when desired.

·         

·         The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized.

·         An automatic vacuum breaker is fitted to all units as a standard accessory in order to break vacuum in case of steam condensation.

·         The flanged immersion type heating element made from a very high grade material provide fast formation of pressure in the system and are protected through a electric low water level cut off device.

·         All sterilizers are provided with triple safety features through a “Piezostate” (automatic pressure control system) and a spring loaded safety valve fitted to the boiler/steam generator.

·       To work on 220/230 or 440 volts, 3 phase, 50 Hz AC supply.

TECHNICAL SPECIFICATION

Gasket: made of joint less silicon rubber.

Exhaust pressure: manual through the exhaust valve

Sterilizing pressure: 1.2 to 1.5 kgf/cm2 (15 to 20 psi) at 121oC

Operating pressure: from 15 psi to 20 psi

Pressure gauge: 0.2.1 kgf/cm2 (30 psi)

Tubular stand and supporting ring: made of mild steel or stainless steel

Pressure Vessel= SS 304 Grade Stainless Steel

External Wall=SS 304 Grade Stainless Steel

Top Lid=SS 304 Grade Stainless Steel

Basket= SS 304 Grade Stainless Steel

INCLUDING

1.     Automatic pressure cut off switch

2.     Digital temperature indicator cum controller

3.     Vacuum breaker

4.     Water level indicator

5.     Automatic self locking system

6.     Automatic low water cut off switch

7.     Moisture trap

Additional Information:

• Delivery Time: 5

We are affianced in manufacturing and supplying Medical ETO Sterilizer widely used in pharmaceutical industry and health care institutions to sterilize products/material sensitive to moisture or heat.
Our ETO sterilizers have the capability to destroy pathogens and consist of electrical heating jackets to provide excellent steam and temperature distribution in the heating chamber.
The Medical ETO Sterilizer supplied by us is functional for sterilizing needles, vessels, syringes and surgical instruments. These are suitable for differential industrial applications in hospitals, clinics and health centers. Ethylene Oxide Sterilization method is widely used by medical device manufacturers for larger scale sterilization.
Our Ethylene Medical ETO Sterilizers are built with features such as continuous gas monitoring system.

Additional Information:

• Delivery Time: 5