Ajanta Export Industry

Voltage

4440V

Overall Dimensions

46Wx60Dx138H CM

Frequency

50Hz

Phase

3 Phase

Motor

1 or 1.5 H.P

RPM

960

Output

45 to 60 tablets per minute

Maximum operating pressure upto

5 tons

Additional Information:

• Delivery Time: 5

Product Description

 12â€?? dia stainless steel the machine is worked by oil immersed by oil immersed gear box with F.H.P. motor drive air blower is operated independently and air is thermostatically controlled to give temp. 30 to 110C switches for motor blower heater and thermostat are fixed on a panel neon indicator. The dia light body heavy body with 1/2HP motor and gear box.

Additional Information:

• Delivery Time: 5

Product Description

Electrical Z-8 Student Kymograph with special heavy duty motor, oil lapped gear systems, speeds from 0.12 mm/sec to 640 mm/sec, in 8 steps, jerk free running, instantaneous start & stop clutch. Stainless steel spindle with screw lift 15 x 15cm cylinder with leveling screws, pilot lamp, plug & cord.

Electrical Z-8 Student Kymograph

Student Kymograph with special heavy duty motor,

Oil lapped gear systems,

Speeds from 0.12 mm/sec to 640 mm/sec,

Kymograph in 8 steps,

Jerk free running,

Instantaneous start & stop clutch.

Stainless steel spindle with screw lift 15 x 15cm cylinder with leveling screws,

Pilot lamp,

Plug& cord

Additional Information:

• Delivery Time: 5

 Body made of MS sheet duly stove painted.

·         Heavy duty cast iron top or S.S. top for operating at high temperatures.

·         Fibre blanket insulated with Kanthal heater and fire proof connection.

·         All our Hot plates are fitted with energy regulator except Cat. No.

·         Available in multiple sizes and shape (Round & Rectangle)

·         Max. Temp. upto 300° C.

·         Temp. controlled by regulator & 3 Heat Switch. 

ROUND, SINGLE, 20 cm (8”) dia. molded top.

ROUND, DOUBLE, Two plates of 20 cm (8”) dia.

COIL TYPE, 20 cm (8”) dia.

Note :

(I)           Sunvic energy regulator extra cost.

(II)          Digital Temp. Controller.               

Additional Information:

• Delivery Time: 5

Product Description

  We offer very good quality super speed Kymograph with improved life time pinion lift. Range of fine vertical adjustment 15 cms. Close mesh 10 speed gear box, gear ratios 1:2 no. Backlash. Instantaneous start at all speeds with built in vibration free, noiseless motor, speed variation from 1 rev. In 25 min. To 25 min. To I rev in ii hours.

  Permissible paper length 2.5 meters, adjustable along machined 120 cm bed; automatic paper tensioning devices, flat writing surface attachment 3 jointment arm upright with fine tangential adjustment, auxiliary cylinder with fine tilt adjustment to permit equalization of tension at the top & bottom of the paper, neutralization clutch for immediate start & stop, centralized electrical points for respiration pump, time clock and operation table, mounted on heavy metal platform with castor, with manometer & two way time  marker.

  Super Speed Kymograph assembly, comprising:-

·        Super Speed Kymograph with manometer & time marker.

·        Starling respiration pumps 500 cc cap. Geared motor coupled.

Additional Information:

• Delivery Time: 5

Product Description

Being a client-centric organization, we are engaged in providing Digital Kymograph that is a device that gives a graphical representation of spatial position over time in which a spatial axis represents time. Our skilled technocrats manufacture this kymograph from premium quality components and advanced technology in compliance with defined industry standards. Ahead of its final dispatch, this kymograph is duly checked by our quality controllers on several parameters of quality.

Additional Information:

• Delivery Time: 5

All Purpose Equipment:- 

The unit is very useful in pharmaceutical lab for multi-analyze test devices on single main drive unit in two section horizontal drive& angular drive. The horizontal drive uses for miscellaneous attachment like Double cone blender, Ball mill, V blender, Friability test, Cube mixer etc. same as behind angular drive uses for attached Coating pan & Polishing pan attachment The drive and attachment are compact, detachable, time saver &easy use for various analyzing tests.

Additional Information:

• Item Code: 5

Usage                                                   For Industrial Use

Material                                                 Stainless Steel

Color                                                    Silver

Product Type                                        Spirometer

Voltage                                                 110-220 Volt (v)

Product Description

6 ltr. Capacity with chin compensates counter balance to flat through pulley calibrated to denote volume inlet & outlet tubes stainless steel chamber with corrugated rubber and mouth piece.

Product Description

Our immense domain expertise and market knowledge assist us manufacture and supply the finest quality array of Polishing Pan. The pan we offer is widely used in pharmaceutical industry for film coating on tablets and granules. The provided pan is manufactured with the usage of supreme grade raw material and under the stern supervision of our technical experts. It is sternly checked by our skilled quality analyzer on different characteristics to maintain its authenticity. Furthermore, this Polishing Pan can be availed from us at affordable prices.

Features:

Steam jacket for heating

Long lasting shine

Supreme functionality

Sturdiness

 Outer Dia.: 12"

Length Dia: 6"

Inner Dia.: 8"

Additional Information:

• Delivery Time: 5

Ever since our establishment in 2005, we are engaged in manufacturing and supplying excellent quality Mechanical Stirrer. These are made at our state-of-the-art facility using highest grade materials and latest forging techniques. Also, to ensure that these clips comply with prevailing industrial standards, they are fabricated under stern vigilance of adroit professionals. Also, this Mechanical Stirrer is extensively used in many industries for stirring and mixing of materials in a hassle free manner.

Features:

Low power consumption

Corrosion resistant body

Prolonged service life

Additional Information:

• Delivery Time: 5

The test equipment work on up and down movement of tablet in medium of water kept at 37ºC. Built  on a M.S. Cabinet, which housed a geared motor for the vertical shaft drive the shaft moves up and down by 7.5 cms at speed of 30 per minute. On the upper end of the shaft fitted a horizontal strip with clamp on either side. These clamps hold glass vessels open at both ends and with stainless steel wire gauge with rubber rings at the lower end, which dips in water. Two interpedently thermostatically controlled not plate rating 65 watt are fixed on the top of the cabinet upon which beakers of 1000 ml size are net filled with water. Temperature is maintained at 37ºC with and accuracy of 1 C. Independent switches with neon indicators for motor hot plates are fitted on a panel. Mains fuse with two meters mains cord and plug provided. Work on 220 volts A.C. mains.

Additional Information:

• Delivery Time: 5

Product Description

Owing to our expertise in this domain, we are engaged in manufacturing and supplying an excellent quality array of Antibiotic Zone Reader. The provided reader is manufactured using the best quality components under the guidance of skilled professionals at our well equipped manufacturing unit. Offered reader provides a rapid and accurate method for determining the strength of antibiotic materials by measuring the diameter of an inhibited zone in petri-dish. Furthermore, this Antibiotic Zone Reader can also be availed from us at reasonable prices.

Features:

Accurate method for determining the strength of antibiotic material

Micro processor based design

Average of Vertical & Horizontal diameter of inhibited zone

Magnified image of inhibited zone is clearly visible on the prism

Additional Information:

• Delivery Time: 5

Compact, rugged construction.

Heavy metallic base fitted with rubber vacuum feets which prevents the movement of shaker during use.

Choice of continuous & touch mode.

Variable speed control.

Maximum speed 3000 RPM.

To work on 220 V ± 10% 50Hz AC.

Include following standard set up with variety of inserts.

Rubber cup attachment for test tubes: 1 No.

Insert for micro tubes of 0.2 ml/0.5 ml: 1 No.

Insert for micro tubes of 1.5 ml/2 ml: 1 No.

Insert plain for conical/ volumetric flask: 1 No.

Additional Information:

• Delivery Time: 5

Temp. range 5°C to 50°C with accuracy of ± 1° C Double walled,inside anodized aluminium/ stainless steel and outside M.S. powder coated/ Stainless Steel (GMP Model) to work on 220/230 volts A.C. 50 Hz.

Optional:

• (i)Timer 0-24 hours day night cycle.
• (ii)CO, air mixer nozzle is provided
• (iii)Internal Illumination with 3 fluorescent tubes.
• (iv)21-CFR Compliance Controller with Software.
• (v)Automatic Voltage Stabilizer 3-5 KVA (recommended must.)

Additional Information:

• Delivery Time: 5

Product Description

Used for tablet to determine the durability from the time of production to the time of use, a transparent plastic drum rotating blade which carries the period is determine by a timber table are weighed before and after the test and difference in weight for a particular time period indicate the rate of abrasion.

Additional Information:

• Delivery Time: 5

Product Description

Jar test apparatus it has been specially designed for use in water treatment plants to correctly estimate the dosing of alum and such other coagulants for treatment of water. It consists of electronically controlled variable speed electronic motor with timing belt driven mechanism. Speed controller is provided to control the speed of four/six stirrers from 5 to 150 rpm. Stainless steel/ brass paddles are provided.

Additional Information:

• Delivery Time: 5

The Skin fold Caliper is a precision instrument designed for use in the performance of Skin fold thickness measurements (from which estimates of body fat are derived). The use of this instrument has been well established and documented over the past 45 years.

The Skin fold Caliper has been used all over the world on projects of international importance and is the most prestigious Caliper available. 
It is the only Caliper CE marked under the Medical Devices Directive 93/42/EEC for a Class 1 Device with Measuring Function and is calibrated using masters traceable to National Standards.

Dial Graduation: 0, 20 mm

Measuring Range: 0 mm to 80 mm

Measuring Pressure: 10 gms/mm2 (constant over range)

Accuracy: 99.00%

Repeatability: 0, 20 mm

Additional Information:

• Delivery Time: 5

Product Description

The apparatus consists of 4 parts. A water bath with 500 watt heater covered 1000 ml. vessel made from Borosil glass and digital temperature control. Variable speed motor, with 30cms longs stainless steel shaft. A cylindrical stainless steel basket and a membrane fixing attachment, water bath is made of imported thick Acrylic sheet with transparent cover at top. Temperature of the bath is maintained at 37ºC with an accuracy of ±1º C.A cylindrical glass vessel of 1000 ml. capacity with slightly concave bottom has a flanged edge at the top to accept a fitted cover having four holes. One hole placed in the centre. The shaft of the motor is fitted on an upright and has an electronic speed regulating device that allows the speed to be varied from 25 to 250 R.P.M. The shaft is 6 mm dia. 30 cms on with basket fitted at end rotates smoothly and without any significant wobble. The basket consists of two parts one of which is attached to the shaft. It is of solid metal except for 2 mm vent and is screwed on the main shaft. Lower part of the basket is held with this part by means of threading and this allows proper removal of lower part for introduction of the test samples. The detachable part of the basket is fabricated of stainless steel mesh formed into cylinder of size 36 mm x 25 mm dia. The equipment is workable on 220 volts 50 C/S A.C. but Analog type single, Double, Three, Six & Eight stage.

Additional Information:

• Delivery Time: 5

Product Details:

It is designed for accurate estimation of disintegration time of tablets as per IP/USP standards.

The instrument is designed to test two batches of six tablets, simultaneously.

The unit consists of two beakers having the capacity of 1000 cc each.

In these beakers, suitable disintegration media can be taken.

These can be temperature controlled using an inbuilt heater and a high thermostat fitted inside the instrument.

Microprocessor based time totalizer is provided for accurate time readout.

Features:

Baskets move up & down as per IP/USP test specifications

Temperature Controlled by sensitive thermostats

Additional Information:

• Delivery Time: 5

Product Description

Portable, hand operated equipment with two extra cap holders of different sizes.

Totally casted machine hand operated.

Bottle Cap Sealing Machine is portable, hand operated equipment with two extra cap holders of different sizes.

Totally casted machine hand operated. Hand operated

Additional Information:

• Delivery Time: 5

Product Description

Ampoule Clarity Test Apparatus

The provided apparatus is manufactured under the vigilance of our experienced professionals at our advanced production unit using quality-approved raw material. Offered apparatus is equipped with an adjustable side-arm with clamp for holding a magnifier for easy and magnified viewing during process. Clients can avail the provided Ampoule Clarity Test Apparatus from us at rock-bottom prices.

Features:

• Superior strength

• Perfect finish

• Durability

Product Description

·         Extremely useful for Pharmaceutical Lab

·         Highly Accurate and Easy to Operate

·         Micro controller Based Digital Display

·         Soft Touch Membrane Keys

·         3 LED’s for status Indication

·         Audible Alarm Sound

·         Last Count Retention on Power Failure.

Additional Information:

• Delivery Time: 5

Product Description

• Low maintenance

• Fine quality

• Longer life Technical Specification: Material S.S. 304 Mirror Finished Temperature 50 Degree – 250 Degree Centigrade Temp. Indicator, Controller Digital display.

Additional Information:

• Delivery Time: 5

Product Description

A Perspex organ bath with fine thermostatic temperature controlled has been designed mainly for student’s experiments with smooth muscles etc.

The bath with leak proof dovetailed joints, and rests on stainless steel/metal supports.

Supplied with upright, organ & oxygen tubes with platinum tip, frontal writing lever from SS capacity tubing

Additional Information:

• Delivery Time: 5

Product Description

Compact, rugged construction.

Heavy metallic base fitted with rubber vacuum feets which prevents the movement of shaker during use.

Choice of continuous & touch mode.

Variable speed control.

Maximum speed 3000 RPM.

To work on 220 V ± 10% 50Hz AC.

Include following standard set up with variety of inserts.

Rubber cup attachment for test tubes: 1 No.

Insert for micro tubes of 0.2 ml/0.5 ml: 1 No.

Insert for micro tubes of 1.5 ml/2 ml: 1 No.

Insert plain for conical/ volumetric flask: 1 No.

Additional Information:

• Delivery Time: 5

Material                                                 Stainless Steel

Usage                                                   For Laboratory Use

Color                                                    Black

Product                                                            TypeAnalgesiometer

Product Description

Eddy’s Hot Plate consisting of 25x25 cms. Heating surface with perplex enclosure and solid state temperature controller with Micro-controller based Digital Temperature Indicator controller to set surface temp. Between 30° to 80° C. 

Additional Information:

• Delivery Time: 5

Usage                                                   For laboratory Use

Color                                                    Silver

Material                                                 Stainless Steel

Product Type                                        Tablet Hardness Tester

Weight                                                  2.6 Pound (lb)

Product Description

A fairly handy instrument for taking quick readings for taking quick readings for the hardness of tablets. It is made of brass turned parts, heavily chrome plated, the scale is 0 to 20kg and the index mark and division is in 1 kg readings. Scale adjustable for zero setting as per size of the tablets.

Additional Information:

• Delivery Time: 5

Usage                                                   For Machinery Use

Color                                                    Silver

Material                                                 Stainless Steel

Product Type                                        Mould

Weight                                                  1-2 Grams (g)

Product Description

 SUPPOSITORY MOULDS: Made from brass/gun metal machine made perfect shapes smooth and polished cavities. Nickel plated various capacities with a number of moulds in each set. 

Capacity:-

A.) 1 gm 

B.) 1.5 Gms

C.) 2 Gms (15.4grains).

1) 2-Moulds set

2) 4-Moulds set

3) 6-Moulds set 

4) 12-Moulds set

Note: Other sizes and capacities on request can be supplied

Additional Information:

• Delivery Time: 5

Material                                     Mild Steel

Voltage                                     220-230 Volt (v)

Usage                                       For Industrial Use

Color                                        Silver & Black

Product Type                            Cone Blender

Product Description

Consists of two S.S. Cones welded with a cylindrical shell and having charging and discharging at opposite ends mounted on a channel stand drive is by means of an electric motor & reduction gear box through a center shift the cone is mounted on Plummer blocks for easy movement thereby ensuring through mixing to facility easy movement of the cone while charging and discharging of the large units a special inching arrangement is provided with the unit motor used are single phase or three phase.

Additional Information:

• Delivery Time: 5

Product Description

Owing to our expertise in this domain, we are engaged in offering an excellent quality array of Sterility Test Apparatus. The provided apparatus is manufactured under the direction of our experienced technocrats using premium grade raw material and the pioneering technology at well-furnished manufacturing unit. Offered apparatus is extensively used in pharmaceutical, chemical, cosmetic and plastic industries. Moreover, this Sterility Test Apparatus can be availed in different specification to meet the requirement of the clients.

Features:

Trouble free functioning

Longer service life

Optimum performance

High operational fluency

Additional Information:

• Delivery Time: 5

Product Description

Leveraging on our vast industry experience, we are offering our clients a finest quality range of Tissue Culture Station. Offered station is suitable to be used in small Laboratories like schools, colleges and other places. Tissue culture refers to the process through which tissues are grown outside of the host body. The provided station is manufactured with utmost precision using premium grade raw material under the guidance of our skilled professionals at our sophisticated manufacturing unit. Furthermore, this Tissue Culture Station is made available at industry leading prices.

Features:

Easy to operate

Maintenance free

Superior performance

Longer working life

Additional Information:

• Delivery Time: 5

Product Description

PERIMETER PRIESTLEY SMITH: - The perimeter is an instrument for accurate charting of the field of vision. It consists of. A vertical stand on which a metallic arc is pivoted. It also bear a circular black disc to read the meridian in which the arc in shape of a semicircle with radius 330 mm. It’s rotating in any direction and fix at any position with a tightening screw. The arc is graduated from 0º to 90º with a movable test object which is a white color spot of size 10mm diameter painted on a circular disc it can be moved with arc. An adjustable chin rest and a detachable leveling bar are fixed in front of the metallic arc. A scale and circular chart frame to hold the chart paper in position is provided at the back of the circular disc. A metallic graduated scale with a movable pin-punch pointer is fixed to mark on the perimeter chart paper.

Additional Information:

• Delivery Time: 5

The unit is specially designed to meet the requirement of High Temperature 1400ºC, the casing is made of M.S. reinforced with iron angles duly painted, Chamber made of Ceramic Zirconium Board and elements are placed Horizontally in the chamber. Heating is done by imported Silicon Carbide Rods duly controlled by accurate step down Transformers (Air cooled), it saves energy upto 30% with easily replaceable Carbide Rods. These Furnaces have outstanding Temperature reliability and has large surface radiation ratio to enhance thermal efficiency and power consumption. Control panel is fitted with Digital Temperature Indicator cum Controller upto 1400ºC Control panel is provided separately having Ammeter Volts Meter and Digital Controller, etc. Maximum Furnace Temperature upto 1400ºC, working Temperature upto 1350ºC opera table in 220 Volts Single Phase AC supply.

Muffle Size (W x H x D) Rating 

100 x 100 x 125 mm        

125 x 125 x 250 mm

150 x 150 x 300 mm

200 x 200 x 300 mm        

OPTIONAL FOR MUFFLE FURNACE

Profile controller with ramp soak facility.

Additional Information:

• Delivery Time: 5